GTR Lighting 25 watt 25 ohm Gold Style Resistors, for Custom Installation
When installing LED bulbs to replace your factory blinker bulbs, you will have a "fast flash" or "hyperflash" problem. This means the vehicle will think you have a light bulb burnt out and, as an indicator to you, will flash quicker than normal. Installing these resistors will fool your vehicle into thinking it has a light bulb in good condition installed and will blink normally. Simply wire the resistor between the ground wire and the blinking positive wire.
This is the smaller 25w version that doesn't create as much heat and can normally be used with high wattage LED bulbs.
Wire Length 12"
WARNING! The resistors get hot! It is very important to mount them to something metal behind the headlights with screws, not zip ties. The resistors get so hot they can melt some light plastic and short wires. Keep them away from all wiring and heat sensitive materials!
2 25w, 25 Ohm Golden Resistors with wires on each side
4 T-Tap Connectors
2 Self-Tapping Screws