Want to add a bit of visual spark to accompany your stereo system? Want to make your LEDs beat/flash/strobe/react/dance to music?
Simply drop this LED controller between your 12 volt power source and LEDs.
You won't be disappointed with this professional grade LED controller.
Kick it up a notch and make your LEDs dance to the beat!
The remote uses Radio Frequency tehcnology, so you don't have to point it directly at the controller, and you can use it up to 30 or 40 feet away.
The maximum amount of current this controller can handle is 12 amps, but that is a LOT of LEDs. This unit can be used with any RGB LED product, or a single color LED product.
The controller is used to control 12 Volt RGB LED Light Bars and Light Strips with common anode wiring. Using the included hand held wireless remote controle, RGB Light Strips can be set to one of seven different static colors or one of four different flashing patterns. The remote control can also adjust pattern speed and turn system ON and OFF. With 10 Amp continous load capability, the controller can drive up to 30 meters of Light Strips. For longer runs use our RGB Amplifiers. Built-in microphone with sensitivity knob is used to trigger color change in time to music for pattern number 12 & 13. Alternatively, Line-Level audio input jack (3.5V p/p max) can be used to trigger color change.
1. It can of course drive any common positive RGB light source.
2. If you just have single color LEDs, no problem, it can easily control those too.