This is like a bite-sized, mini version of our LED Remote Control system. This single-color LED controller gets wired in line, in series, with the LED power wires. It allows you to control the LED (a strip, a bulb, or any LED module) with different on/off patterns and brightness/dim function.
The biggest benefit to you? It has memory, so when you remove power, it will start right back up on the same mode/speed you last left it on.
Why is this cool? Its so tiny and easy to tuck away, you could set it to your favorite mode, and then forget about it.
- Make your own motorcycle taillight strobes to draw more attention. Just set it on one of the super fast flashing modes.
- Heartbeat fade in / fade out mode for event decoration, costumes with LEDs, etc.
- Strobe modes for headlight flashers.
- And of course it can be used for many more cool projects. Use your imagination!
Press this key to switch between 8 dynamic modes. SPEED / BRIGHTNESS - / Power Off: Dynamic Mode - Quickly press to adjust the speed of the dynamic modes, 10 different speeds are available. Static Mode - Quickly press to adjust brightness, 10 levels of brightness are available. Power Off - Press and hold for about 1 second to switch controller off. Press any key to turn controller back on. On wake-up the controller will resume using the settings in use prior to power off. LIGHT / Brightness + : Switches to Static Mode. Press to increase brightness. Press and hold key for 1 second to select max brightness.
Supply Voltage: DC 12~24V
Max load current: 5 Amps
Output: 1 Channel
Static power consumption: < 1 Watt
Output Power: 48W @ 12V / 96W @ 24V
Function: Dim LED product from 15~100% using PWM series CPS Power Supplies
Product size: (L)33 x (W)13 x (H)4 mm
Net Weight: 30g
Working temperature: -20~60°C
Wire Length: 4.2"