GTR Lighting Quick Clip LED Strip Harness, 2-Pin (For Single Color LED Strips)
Each harness has 2 clips, 1 on each side of the harness and can be used to join LED strips or cut the harness in half to make a pigtail.
When using the flexible LED strips that come in 5 meter rolls, sometimes you have to cut it to length and to attach the cut side to a power source requires soldering onto the circuit board. Now, there is a quick connection available to make your install much easier!
This picture shows how to use the 2-pin connector to hook up to a flexible LED strip using single-color LED chips. This harness will not work work for the RGB strip, only the single-color style.
- Cut the LED strip to the length you want.
- Peel away the soft silicone cover on the LED strip exposing the bare contacts.
- Line up the quick clip harness so the red wire contacts the positive side and the black wire contacts the negative side, of the LED strip.
- Press the quick clip harness together until it clicks. Test by applying 12v DC to the red and black wires.
Wire Length 7"
Limited Lifetime Warranty